Complete Solar Submersible Water Pump Kit with Aluminium Protection

PLEASE NOTE THAT THIS PACKAGE DOES NOT INCLUDE SOLAR PANELS, ITS IS ONLY WATER PUMP, SOLAR CONTROLLER AND CABLES.

SOLAR PUMPING SYSTEM

Solar pumping system mainly consists of PV modules, solar pumping controller / inverter and water pumps, Solar panels convert sunlight to electrical energy which is passed to the solar pump controller, The solar controller stabilizes the voltage and output power to drive the pump motor, Even on cloudy days,it can pump 10% water flow per day. Sensors are also connected to the controller to protect the pump from running dry as well as to automatically stop the pump working when the tank is full.

Service capabilities

1. No MOQ required, Most solar water pumps ready in stock(fast lead time)2. Two Years Warranty3. Experienced manufacturer of over 15 years4. Manufacture more than 50000pcs per year5. Exported more than 60 countries

How to choose pump

How to choose pump

Calculation of pump head

1）H1:vertical distance from the pump to the ground

2）H2:Vertical distance from water tank to ground
3）L:Horizontal distance from water pump to tank

4） Total head = H1+H2+L*10%

Calculation of pump Flow

1）Time: 5 hours (estimated working hours of solar water pump)2）Daily water consumption: daily water consumption of water pump (m³)3）Actual flow: daily water consumption/time

(m³/h)

Pls select the right pump below yourself, or pls inform us below information, then we can select the right pump for you.

1. Where will the pump be used?
2. How much water discharge ( liters or gallon or m3) required per day or per hour?
3. Do you need a submersible pump or surface pump?
4. If you want to pump the water from borehole(deep well), the depth of borehole?
5. The pipe distance from the top of borehole or river to destination tank? Is the distance slope or horizontal?
6. The height of tank?

Analysis of pump parameters

Solar plastic impeller pump Outlet size:3 inch（76mm）/4 inch(100mm)

6.0:Pump Max Flow is 6.0 m3/h

42:Pump Max Head is 72m

D48:pump voltage is DC 48V

550:Pump Power is 550W(0.75HP)

Recommend Products

MOTOR

– The efficiency is improved 25% by the permanent magnetism,direct current, brushless, non-sensor motor.- Adopt double plastic package for rotor and stator,motor insulation ≥300MΩ,the motor security was much improved.- 100% copper wire, DW-300 cold-rolled silicon steel sheet.- Stainless steel 304 & 316 shaft , motor body, screw.

Pump material:

Outlet: stainless steel AISI 304 or AISI 316LPump body: stainless steel AISI 304 or AISI 316L Motor body: stainless steel AISI 304 or AISI 316L Motor Shaft: stainless steel AISI 304 or AISI 316L Mechanical seal: Special seal for deep well(Graphite-Ceramic)Bearing: C&U or NSK

►MPPT Controller function/MPPT

● Low-voltage protection ●Over-voltage protection●Over-current protection●Dry-protection protection● Reverse connection protection● Soft starting protection

●Lack of water protection

►VOC RANGE:

●24V controller:26-50V

●48V controller:50-100V

●72V controller:76-150V

●96V controller:100-200V

●MAX input current:15A

●Ambient temperature:-15℃-70℃

Installation Diagram

Solar pumping system mainly consists of PV modules, solar pumping controller / inverter and water pumps, Solar panels convert sunlight to electrical energy which is passed to the solar pump controller, The solar controller stabilizes the voltage and output power to drive the pump motor, Even on cloudy days,it can pump 10% water flow per day. Sensors are also connected to the controller to protect the pump from running dry as well as to automatically stop the pump working when the tank is full.Solar panel collects sunlight→DC electricity energy → Solar Controller (rectification,stabilization, amplification,filtering)→available DC electricity→(charge the batteries)→pumping water Since the sunlight/sunshine is not the same in different countries /regions on earth, the solar panels connection will be slightly changed when installed in different place, In order to ensure the same/similar performance & efficiency,The recommended solar panels power = Pump Power * (1.2-1.5)

solar powered water pumps are mainly used in: 1. Irrigation of agriculture. 2. Drinking water and living water. 3. Remote areas, farming4. Fountains. 5. Swimming pool circulation and filtration.